HappyLiner VENTED FL-0019 Rubber Milking Liner suitable for Lely

HappyLiner VENTED FL-0019 Rubber Milking Liner suitable for Lely

• Rubber liners 19mm
  
• Fits in the long cups from Lely
• High quality rubber
• Interchangeable with the original Lely teat liners
• For 2,500 milkings
• Improved lining head
• Rounded head for better fit and less air suction
• Sold in sets of 4
  
• WITH HEAD VENTILATION
• Can also be used in combination with the FL-0021 Vented

HappyLiner Vented Step-by-Step Plan

With the HappyLiner with head ventilation, it is important that the hole at the bottom is sealed. Here is the step-by-step plan:

• Close the hole in the stainless steel part under the cup, the stainless steel milk collection part;
• Make the hole clean and dry;
• Push the silicone plug a short distance into the hole, +/- 5mm;
• Cut off the remaining protruding part of the wad with a sharp knife;
• Using a blunt object (such as an Allen key), press the silicone plug into the hole until it stops, so that the plug sits recessed in the hole of the stainless steel milk collection section.
• It is also a good idea to check the pulsation settings in T4C.

The default settings are:

• 60 beats per minute
• 43 kPa
• 65 / 35 suction/rest ratio